Find Jobs for Military Veterans in Texas

Job Description

Position Details:
Title: Field Service Technician
Location: Dallas, TX
Shift: Typically, day shift and must be flexible for travel throughout the Dallas region
Compensation: $32 hourly starting annualized wage depending on experience and qualifications plus OT Benefits: Full benefit package which includes Holiday pay, 401K, Medical and Dental, generous vacation (PTO) and room for advancement. Company vehicle provided.
Travel: Must be flexible for travel within the greater Dallas Forth Worth region
Position Description:
Maintains and repairs stationary steam boilers and boiler house auxiliaries by performing the following duties. Diagnose the cause of equipment malfunction or failure. Disassembles repairs and reassembles components and units as required. Adjusts and calibrates equipment to operating specifications. Assembles and installs new units as required. Sells Assured Preventive Maintenance Programs, service & repair parts, compounds, and chemicals.

• Receives working instructions, work orders, blueprints, or drawings from supervisor.
• Reviews job requirements and verifies that the required tools, equipment, parts, material, and manuals are part of the service vehicle inventory.
• Diagnoses the cause of equipment malfunction or failure by interviewing customer, using appropriate monitoring and test equipment.
• Disassembles, repairs, and reassembles units as required.
• Uncrates and assembles new units according to specifications.
• Trains customer-operating personnel.
• Cleans or directs other workers to clean boilers and auxiliary equipment.
• Inspects and repairs boiler fittings such as safety valves, regulators, automatic control mechanisms, and
water columns, and auxiliary machines such as pumps, draft fans, stokers, and burners. y
• Replaces damaged boiler tubes and plates.
• Repairs or replaces high-pressure piping. Patches boiler insulation, Paints surface of equipment. Performs water pressure test by pumping water into system to determine location of leaks.

Requirements:
• Must have no traffic violations that prohibit the use of a motor vehicle and be eligible for automobile insurance coverage
• Six (6) years’ experience in related field or three (3) years related experience with technical school background or two (2) years company product mechanical experience.

Job Description

Position Details:
• Title: Industrial Mechanic
• Location: Fort Worth, TX
• Shift: 1st Shift 6am – 2pm or 2nd Shift 2pm to 10:45pm Mon - Fri
• Compensation: $23 – $25/hour plus overtime
• Benefits: Competitive, based on experience
• Travel: None
• Vaccine Requirement: Not applicable

Requirements:
You will perform preventative maintenance on industrial machinery, engines, motors, pneumatic tools, and production machines, adhering to manuals, diagrams, and engineering specifications. The role includes troubleshooting and repairing hydraulic, pneumatic, and mechanical systems, including gearboxes and electrical controls, as well as fabricating repair parts using machine shop instruments and equipment when needed. The individual will provide recommendations to improve mechanical maintenance reliability, ensure a safe work environment by following PPE and lock-out/tag-out procedures, and operate a forklift (certification required). The job also involves performing basic facility repairs, such as plumbing, lighting, and HVAC, while closely collaborating with the Maintenance Manager, engineering, and production teams to coordinate repairs.

Requirements:
• 5+ years of experience in an industrial, manufacturing, or production environment.
• Hands-on experience with hydraulic, pneumatic, and mechanical repairs, with strong troubleshooting skills.
• Associate’s degree or equivalent technical training preferred, or a combination of education and experience.
• Ability to read and interpret schematics and technical diagrams.
• Basic computer skills, including familiarity with department programs, scanning systems, and touchscreens.
• Mathematical proficiency with whole numbers, fractions, and decimals.
• Strong reasoning skills to apply mechanical knowledge in troubleshooting and resolving breakdowns.

Job Description

Position Details:
• Title: Renewable Energy Technician
• Location: Coldwater, MI (Tibbits Site), Bremond, TX (Tidwell Site)
• Shift: No, field service position.
• Compensation: $36/hr - $42/hr.
• Benefits: Med, Dent, Vis, 401k/w match
Position Description:
• Perform basic work in construction and maintenance of all substations, transmission, collection system, and battery storage systems.
• Provides troubleshooting assistance and resolution with protections and control equipment and relay schemes
• Reports and coordinates emergency response and repair to all high voltage equipment and BESS systems
• Establishes and maintains high voltage inventory, equipment, tooling, and vehicles
• BOP operations and construction, including substation equipment, and BESS equipment
• LOTO training and proficiency
• Operate the facility in a safe and environmentally friendly manner.
• Supports emergency response during after hour call-outs
• Interface and coordinate with contractors, suppliers, and landowners
• Able to understand, read, and high voltage electrical schematics

Requirements:
• High School Diploma or equivalent
• Valid driver’s license
• 4 years’ High Voltage electrical experience and/or Military equivalent experience.
• Experience using and understanding diagnostic tools
• Computer operation skills, familiar with internet-based program navigation and have the ability to generate and interpret computer data
• Ability to read, interpret, and understand drawings and schematics with attention to detail
• Ability to follow safety protocols on site
• Effectively communicate with third parties, vendors, and co-workers
• Good written communication skills

Physical Demands – Job Site
While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is required to stand; walk; sit; reach with hands and arms and pull/push; climb or balance; and stoop, kneel, crouch, or crawl. The employee must lift and/or move up to 50 pounds without assistance. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus.

Job Description

Position Details:
• Title: Renewable Energy Technician
• Location: Coldwater, MI (Tibbits Site), Bremond, TX (Tidwell Site)
• Shift: No, field service position.
• Compensation: $36/hr - $42/hr.
• Benefits: Med, Dent, Vis, 401k/w match
Position Description:
• Perform basic work in construction and maintenance of all substations, transmission, collection system, and battery storage systems.
• Provides troubleshooting assistance and resolution with protections and control equipment and relay schemes
• Reports and coordinates emergency response and repair to all high voltage equipment and BESS systems
• Establishes and maintains high voltage inventory, equipment, tooling, and vehicles
• BOP operations and construction, including substation equipment, and BESS equipment
• LOTO training and proficiency
• Operate the facility in a safe and environmentally friendly manner.
• Supports emergency response during after hour call-outs
• Interface and coordinate with contractors, suppliers, and landowners
• Able to understand, read, and high voltage electrical schematics

Requirements:
• High School Diploma or equivalent
• Valid driver’s license
• 4 years’ High Voltage electrical experience and/or Military equivalent experience.
• Experience using and understanding diagnostic tools
• Computer operation skills, familiar with internet-based program navigation and have the ability to generate and interpret computer data
• Ability to read, interpret, and understand drawings and schematics with attention to detail
• Ability to follow safety protocols on site
• Effectively communicate with third parties, vendors, and co-workers
• Good written communication skills

Physical Demands – Job Site
While performing the duties of this position, the employee is regularly required to talk or hear. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is required to stand; walk; sit; reach with hands and arms and pull/push; climb or balance; and stoop, kneel, crouch, or crawl. The employee must lift and/or move up to 50 pounds without assistance. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus.

Job Description

Job Title: Senior Engineer
Lubbock, TX

Position:
The company has an immediate opening for a Sr. Engineer to join their dynamic team. The qualified candidate will have between 7-10 years of relevant experience.
The qualified candidate should possess a high energy level, be self-motivated, and wear multiple hats through the management of a project. Technical specialization, proactivity and aggressiveness when meeting client and project needs are pluses. In addition to all the skills listed above, the qualified candidate should possess a strong “can-do” customer service attitude.

You will be responsible for helping develop the Houston market and managing our existing clients while developing new client cities, counties, MUD’s and others. You will be responsible for design, helping win work, proposals, and developing staff.

Qualifications:

Professional Engineer, Texas

7-10 Years Experience

Design Experience

Mentoring & Training of Staff

Business Development

Communication with Clients and Staff

Project Management

Growth Driven with a Winning Attitude

Construction support services for civil works projects

Proficiency in AutoCAD and Civil 3D software

Proactive attitude of taking independent initiative, exhibiting creative problem-solving, and eagerness to learn, while remaining dedicated to teamwork

Experience leading projects and mentoring junior staff

Strong analytical and organizational skills

Strong verbal and written communication skills including presentations

Demonstrated career growth that includes project management experience

*Must be a licensed P.E.

*Candidates must be proactive, have strong organizational skill, excellent written and verbal communication skills, and be client-service oriented

Job Description

Job Title: Senior Engineer
Location: Houston, TX

Position:
The company has an immediate opening for a Sr. Engineer to join their dynamic team. The qualified candidate will have between 7-10 years of relevant experience.
The qualified candidate should possess a high energy level, be self-motivated, and wear multiple hats through the management of a project. Technical specialization, proactivity and aggressiveness when meeting client and project needs are pluses. In addition to all the skills listed above, the qualified candidate should possess a strong “can-do” customer service attitude.

You will be responsible for helping develop the Houston market and managing our existing clients while developing new client cities, counties, MUD’s and others. You will be responsible for design, helping win work, proposals, and developing staff.

Qualifications:

Professional Engineer, Texas

7-10 Years Experience

Design Experience

Mentoring & Training of Staff

Business Development

Communication with Clients and Staff

Project Management

Growth Driven with a Winning Attitude

Construction support services for civil works projects

Proficiency in AutoCAD and Civil 3D software

Proactive attitude of taking independent initiative, exhibiting creative problem-solving, and eagerness to learn, while remaining dedicated to teamwork

Experience leading projects and mentoring junior staff

Strong analytical and organizational skills

Strong verbal and written communication skills including presentations

Demonstrated career growth that includes project management experience

*Must be a licensed P.E.

*Candidates must be proactive, have strong organizational skill, excellent written and verbal communication skills, and be client-service oriented

Job Description

Job Title: Senior Engineer
Location: Fort Worth, TX

Position:
The company has an immediate opening for a Sr. Engineer to join their dynamic team. The qualified candidate will have between 7-10 years of relevant experience.
The qualified candidate should possess a high energy level, be self-motivated, and wear multiple hats through the management of a project. Technical specialization, proactivity and aggressiveness when meeting client and project needs are pluses. In addition to all the skills listed above, the qualified candidate should possess a strong “can-do” customer service attitude.

You will be responsible for helping develop the Houston market and managing our existing clients while developing new client cities, counties, MUD’s and others. You will be responsible for design, helping win work, proposals, and developing staff.

Qualifications:

Professional Engineer, Texas

7-10 Years Experience

Design Experience

Mentoring & Training of Staff

Business Development

Communication with Clients and Staff

Project Management

Growth Driven with a Winning Attitude

Construction support services for civil works projects

Proficiency in AutoCAD and Civil 3D software

Proactive attitude of taking independent initiative, exhibiting creative problem-solving, and eagerness to learn, while remaining dedicated to teamwork

Experience leading projects and mentoring junior staff

Strong analytical and organizational skills

Strong verbal and written communication skills including presentations

Demonstrated career growth that includes project management experience

*Must be a licensed P.E.

*Candidates must be proactive, have strong organizational skill, excellent written and verbal communication skills, and be client-service oriented

Job Description

Position Details:

Title: Field Service Technician
Location: Houston, TX
Shift: Day shift
Compensation: $34-$44 per hour+ OT
Benefits: Comprehensive Corporate Benefits Package (Medical, Dental, PTO, 401K)
Travel: 75%-80% (Regional, Surrounding States, Conducting Training in Richmond VA)

Position Description:

Performs Service tasks, identifies technical problems and makes analysis through remote or on-site activity in any Service categories (installation and commissioning, maintenance, repairs, engineering and consulting, advanced services, extensions, upgrades and retrofits, end of life services, replacements, etc.).
Contributes to customer satisfaction by executing Service work according to customer order and expectation. Creates and maintains a good relationship with customers and understands their needs. Identifies new sales opportunities and communicates them internally.
Coordinates, prepares and ensures that all materials, parts and equipment are available and at the appropriate quality for Service activities.
Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed.
Proactively identifies potential equipment failures and requests proactive corrective actions. Troubleshoots equipment failure and makes recommendations to avoid repeating the problem in the future.
Proactively identifies suggestions for product and quality improvement and communicates them further in the organization. Provides recommendations to management to improve operations and customer service.
Applies safety rules and safe practices as well as environmental responsibilities. Reports unsafe practices and incidents.

Requirements:

Bachelor’s degree, Electrical Engineering, Electrical Engineering Technology or equivalent military experience or Associates Degree with 2 or more years’ experience in servicing critical power equipment
Will consider High School Diploma/GED and 10 or more years’ experience.
Advanced level ability to interact and communicate (written and verbal) information to varying levels within the organization.
Advanced level of ability to use Microsoft Office products.
Moderate ability to self-Project Manage using MS Project or Excel.
Advanced ability to write test plans and reports detailing test results.
Military Preferred
 

Job Description

Position Details:

Title: Field Service Technician
Location: Dallas, TX
Shift: Day shift
Compensation: $34-$44 per hour+ OT
Benefits: Comprehensive Corporate Benefits Package (Medical, Dental, PTO, 401K)
Travel: 75%-80% (Regional, Surrounding States, Conducting Training in Richmond VA)

Position Description:

Performs Service tasks, identifies technical problems and makes analysis through remote or on-site activity in any Service categories (installation and commissioning, maintenance, repairs, engineering and consulting, advanced services, extensions, upgrades and retrofits, end of life services, replacements, etc.).
Contributes to customer satisfaction by executing Service work according to customer order and expectation. Creates and maintains a good relationship with customers and understands their needs. Identifies new sales opportunities and communicates them internally.
Coordinates, prepares and ensures that all materials, parts and equipment are available and at the appropriate quality for Service activities.
Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed.
Proactively identifies potential equipment failures and requests proactive corrective actions. Troubleshoots equipment failure and makes recommendations to avoid repeating the problem in the future.
Proactively identifies suggestions for product and quality improvement and communicates them further in the organization. Provides recommendations to management to improve operations and customer service.
Applies safety rules and safe practices as well as environmental responsibilities. Reports unsafe practices and incidents.

Requirements:

Bachelor’s degree, Electrical Engineering, Electrical Engineering Technology or equivalent military experience or Associates Degree with 2 or more years’ experience in servicing critical power equipment
Will consider High School Diploma/GED and 10 or more years’ experience.
Advanced level ability to interact and communicate (written and verbal) information to varying levels within the organization.
Advanced level of ability to use Microsoft Office products.
Moderate ability to self-Project Manage using MS Project or Excel.
Advanced ability to write test plans and reports detailing test results.
Military Preferred
 

Job Description

Position Details:

Title: Regional Sales Manager
Location: TX. Home based near major airport.
Shift: 1st shift
Compensation: $50k + tiered commission + multiple bonus targets (W2 is around $100k in first year. Territory will support $120K - $130K+ once running)
Benefits: full comprehensive and 401k
Travel: 50% in Southwest Region.
Vaccine Requirements: None

Position Description :
The Southwest Regional Sales Manager reports directly to the National Sales Manager and is responsible for driving the company’s growth in the following states: Colorado, Louisiana, New Mexico, Texas, Oklahoma, and Arkansas.

This is a very hands on role and will be responsible identifying and qualifying leads, interviewing prospects, determining customer needs, coordinating/participating in onsite demonstrations, working with the customers to develop cost/benefit analyses, creating customized proposals, and acting as a liaison for all orders, training, and customer service. The best characteristic for this role will be a down to earth, in-the-field mentality as your customers may be Foremen of construction sites or GMs of landfills and you'll need to get on their sites to best service their needs.


Requirements:
-Engineering or technical degree preferred (Civil, Environmental or Industrial) but not required.
-Strong experience following a rigorous sales process and utilizing state of the art CRM tools, such as Salesforce or Zoho.
-Intellectual curiosity (Strong desire to understand industry trends and competitive products).
-Valid driver’s license and ability to travel throughout the region a few times a month.

Job Description

Position Details:
Title: Sr. Electrical Commissioning Engineer
Location: Irving, TX
Shift: Dayshift. Occasional weekends due to projects.
Compensation: $65K - $125K. Dependent upon experience. All employees are eligible for annual bonuses.
Benefits: Benefits including but not limited to medical, dental, vision and many more!
Travel: up to 25% overnight travel

Position Description:
The Electrical Commissioning Engineer will lead the mechanical/ electrical commissioning effort by scheduling the commissioning activities, preparing test scripts, and directing commissioning and testing activities in the field. Project types include airports, data centers, central utility plants, and office buildings. The Electrical Commissioning Engineer will collaborate with the mechanical commissioning engineer/specialist, design engineers, vendors, contractors, and client to test and validate electrical power and control systems. This position requires travel to sites throughout the US and includes working directly with the client. The ability to work both independently and in a team environment is essential.

Requirements:
• Experience with electrical testing, commissioning, and/or design experience.
• Thorough understanding of complex electrical power distribution systems.
• Knowledge of electrical and/or mechanical industry standards and codes.
• Good written and verbal communication skills, strong leadership skills, attention to safety, strong analytical, problem solving, and trouble shooting skills.
• Experience using electrical testing equipment.

Job Description

Position Details:

Title: System Testing Analyst

Location: Deer Park, TX

Shift: Monday – Friday | 8am – 5pm

Compensation: First year W2 between $75K - $85K

Compensation structure is $20-$21/ hour + OT + 4% onshore / 8% offshore project commission
$5,000 sign on bonus
Benefits: Health, Dental, Life, and Supplemental Insurances available; Paid time off (PTO) – 3 weeks (15 days); paid holidays; up to 4% 401K match

Travel: All travel will be in company-provided vehicles. Travel percentage is between 50%-75% travel, mostly local with infrequent overnight travel.



Position Description:

The System Testing Analyst will check conditions, fluid levels, overall battery voltage, and specific gravity readings of cells, using voltmeters and hydrometers.

Connect sensing leads to batteries and recording cell float voltages.
Connect portable battery plant with station battery when needed.
Communicate with customer on all necessary connections to equipment. Connect load banks to batteries.
Apply temperature correction factor to discharge load and program test equipment.
Initiate capacity tests, maintaining load at the specified level throughout testing until battery terminal voltage drops below the specified end voltage.
Assist customer personnel in adjustment of charger current limit and output voltage levels.
Check voltage and polarity with a calibrated digital multimeter prior to making any battery connections.
Check for voltage and continuity with a calibrated multimeter prior to making any connections to the load bank(s).
Protect all cables from pinch points, sharp edges, and any short circuits.
Safely and proficiently operate a 20’ straight box truck. Understand the basic theory of reasons for capacity testing.
Proper use of a multimeter and amp clamp. Proper use and selection of PPE.
Understand parallel series circuits. Understand the NPG procedures for testing.


Requirements:

The ideal candidate has 2+ years of technical training and hands-on experience in an electronic/electrical role with the US Navy or Airforce. Experience with UPS/Turbine systems and Telecom are a plus. You must also have knowledge and experience with Oscilloscopes, Multi-meters, Hydrometers, and Computer Skills, software skills (Microsoft Word and Excel).



Additional Requirements Include:

Must have satisfactorily completed a pre-employment assessment, background screening, pre-employment physical and DOT drug screen (hair follicle).
Must have a valid driver’s license, insurable driving history and ability to operate a motor vehicle following all traffic laws and safe, courteous driving habits.
Must be legally eligible to work in the United States without employer sponsorship.

Job Description

Position Details:

Title: Maintenance Technician

Location: Houston, TX

Shift: Mon-Fri; 1st shift opportunities! (6:45a-3:15p)

Compensation: $26-$34/hr depending on qualifications and experience! + call-out bonus, when accepted

Benefits: Company offers a competitive benefits package that includes health, dental, vision, vacation, and paid holidays, a 401k match and profit sharing, employee assistance programs, tuition reimbursement, and more!



Position Description:

The Maintenance Technician will assist with both preventive and repair maintenance on machinery, equipment, and the facility while working to maintain safety standards and maintenance systems.

Performs and assists with preventive, predictive, and corrective maintenance on machinery, equipment, and facility
Maintains safety standards and maintenance systems
Troubleshoot and diagnose malfunctions while working to eliminate emergency repairs
Specifically, diagnose electrical issues with a meter to isolate and resolve the issue
Conduct routine preventative maintenance on machinery, equipment, and facility
Install and replace both automated and mechanical equipment and devices
Must work in full compliance with the approved safety regulations
Maintain safety standards and a clean work environment
Additional duties as assigned by the supervisor


Requirements:

The perfect fit for Military Veteran technicians ready to work and learn! The ideal candidate will have industrial maintenance experience (or military equivalent experience!) and PLC troubleshooting.

2 to 5 years of related industrial maintenance experience, military experience counts!
PLC troubleshooting experience / PLC programming knowledge a plus.
Strong electrical skills required
Basic mechanical, basic pneumatic, and hydraulic skills are a plus
General mechanical and electrical knowledge as it comes to industrial settings of motors and controls is essential.
Ability to read and interpret work orders, equipment manuals, diagrams, and specifications
High school diploma or GED required
Ability to lift and move materials up to 50 pounds

Job Description

Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals to be a Boiler Controls Technician with a company that has been at the forefront of the petroleum industry for over 60 years.

Position Details: Boiler Controls Technician
• Location: Ennis, TX
• Shift: In-shop M-Th. 10-hour shifts, with flexibility for client needs and travel. After-hours and weekend callouts are rare, and travel typically follows a M-F schedule.
• Compensation: $35-$48/hr. based on experience, plus ample OT opportunities
• Bonuses/Additional Compensation – Company card for travel expenses and daily travel per diem
• Benefits: Company offers a benefits package including comprehensive health, dental, life, Short- and Long-Term Disability; 401(k) match, profit sharing, and several other benefits.
• Travel: 75% (routine travel to facilities, up to a week, to perform job functions)
• Vaccine Requirement: No

Position Description:
Provides nationwide support of fired equipment. Must be willing to listen to feedback, learn, and take on assignments that will stretch your abilities. Success in the role will open you up to many opportunities to purposely grow within the group and potentially other sister companies. Service, repair, troubleshoot, and perform preventive maintenance on all types of boilers, heaters, fired equipment, etc.

Requirements:
• Experience in servicing and tuning boilers and fired equipment (natural gas on single point – linkage type)
• Proficient with electrical multi-meter and 120v AC and low voltage control circuitry
• Proficient in reading and interpreting electrical schematics
• Preference for individuals with experience on VFDs, PLCs, single loop controllers and other electronic controls desired
• Demonstrate good communication and organizational skills
• Valid driver’s license

Job Description

Position Details:

Title: Chassis Mechanic
Location: Fort Worth, TX
Shift: Mon – Fri 8a-430p
Compensation: $25-$30/hr + OT + $5,000 sign-on bonus + Quarterly incentive bonus plan
Benefits: Medical and dental, 401(k) w/6% match, company truck, PTO, paid holidays, and much more!
Travel: None


Position Description:

The Chassis Mechanic will perform mechanical repairs and inspections in a depot/repair facility environment, repairs to be performed in a shop setting. The employee will perform all types of chassis repairs including brakes and wheel end repairs, welding, cutting with a torch and repairing and replacing parts on the chassis using standard repair tools. Repairs will be performed to FMCSA standards and completed based on written estimates.

Troubleshoot and repair all chassis defects
Including ABS systems; air brake systems, wheels end, and structural assemblies
Some welding and fabrication of chassis
Use of mobile app to log work orders and document repairs

Requirements:

2+ years of experience as a trailer/chassis mechanic, usage and customary repair methods preferred
Candidates with a diesel or auto mechanic background will be strongly considered as well
FMCSA and brake certifications preferred
Knowledge in welding MIG and/or ARC welding, torch use is a plus, but not required
Must have a valid drivers license and a good driving history and able to pass background check and pre-employment drug screening (including CBD).

Job Description

Position Details:

Title: Field Service Technician
Location: Austin, TX
Shift: Day shift
Compensation: $34-$44 per hour+ OT
Benefits: Comprehensive Corporate Benefits Package (Medical, Dental, PTO, 401K)
Travel: 75%-80% (Regional, Surrounding States, Conducting Training in Richmond VA)

Position Description:

Performs Service tasks, identifies technical problems and makes analysis through remote or on-site activity in any Service categories (installation and commissioning, maintenance, repairs, engineering and consulting, advanced services, extensions, upgrades and retrofits, end of life services, replacements, etc.).
Contributes to customer satisfaction by executing Service work according to customer order and expectation. Creates and maintains a good relationship with customers and understands their needs. Identifies new sales opportunities and communicates them internally.
Coordinates, prepares and ensures that all materials, parts and equipment are available and at the appropriate quality for Service activities.
Prepares all documents and reports to be signed by the customer representative. Reports work done in a timely manner and follows up when needed.
Proactively identifies potential equipment failures and requests proactive corrective actions. Troubleshoots equipment failure and makes recommendations to avoid repeating the problem in the future.
Proactively identifies suggestions for product and quality improvement and communicates them further in the organization. Provides recommendations to management to improve operations and customer service.
Applies safety rules and safe practices as well as environmental responsibilities. Reports unsafe practices and incidents.

Requirements:

Bachelor’s degree, Electrical Engineering, Electrical Engineering Technology or equivalent military experience or Associates Degree with 2 or more years’ experience in servicing critical power equipment
Will consider High School Diploma/GED and 10 or more years’ experience.
Advanced level ability to interact and communicate (written and verbal) information to varying levels within the organization.
Advanced level of ability to use Microsoft Office products.
Moderate ability to self-Project Manage using MS Project or Excel.
Advanced ability to write test plans and reports detailing test results.
Military Preferred
 

Job Description

Position Details:

• Title: Field Service Technician
• Location: Northern region – Indiana to New England (Live near major airport) and Southern Region (Live in Raleigh, NC), and Dallas or Houston, TX area.
• Shift: Monday through Friday, occasional evening or weekend.
• Travel: 80 - 90% - Monday through Thursday
• Compensation: $80k to $85K (depending on experience and location) plus OT, car allowance($880/mo) and quarterly bonus
• Benefits: Includes excellent medical benefits package, to include major medical, vision and dental and employee only pays 10% of actual benefit costs. 401K with 100% company match up to 6%. Paid vacation- 3 weeks to start. Nine company holidays. Full expense reimbursement on all company related travel and expenses.

Position Description:

• Provide installation and service support to the pharmaceutical isolators at customer locations focusing on proper installation of equipment, preventative maintenance, calibration, and troubleshooting
• Interact with external customers and internal company Sales, Service, and technical support personnel
• Provide preventative maintenance and calibration services, requalification services on pharmaceutical isolators to include air flow analysis, HEPA filtration scanning, etc.
• Support company US sales team with technical resolutions
• Provide upgrade support for specialty service products, to include control conversions and Wireless Glove Testing qualification and validation
• Conduct basic client training on-site with regards to proper operation of devices post-assembly and post-maintenance

Requirements:

• Technical training in Electrical, Mechanical, Mechatronics through the military, and/or prior experience in cGMP or other heavily regulated industries, Bachelor’s degree preferred
• Professional experience in field service and general mechanics, preferably with a pharmaceutical or laboratory equipment background
• Understanding of PLCs and ability to read, interpret, and understand technical documentation, including but not limited to schematics, P&ID, wiring diagrams and work instructions
• Knowledge of basic electricity, electronics and instrumentation, calibration, and general mechanics
• Willingness and ability to travel domestically and internationally up to 90%, with some weekend travel. Travel may include a visit to company AG in Basel, Switzerland for multiple-week training and team exchange sessions
• Effective written and verbal communication skills, with a strong customer focus and ability to converse with external customers and internal company Sales, Service, and Technical support personnel
• Knowledge of technical expertise, cGMP Standards, OSHA requirements, FDA and EU guidance related to aseptic production, USP and EP standards desired
• Proficient with Microsoft Office Suite and IT products
• Fluent in English required, German language fluency a plus
• Must be able to lift up to 75 lbs.

Job Description

Position Details:
Title: PSV (Pressure Safety Valve) Operator
Location: West Texas and Eastern New Mexico (Permian Basin)
Shift: Typically, Monday – Friday | 1st Shift
You should be willing to work emergency night and weekend calls as needed
Compensation: $125K+ annually (depending on experience) + annual bonus
Benefits: Company offers a comprehensive benefits package including Medical, Dental, Vision, 401(k) with company matching, Life and Disability Insurance, as well as generous PTO and paid holidays.
Travel: Primarily office based with limited regional travel to sites as needed (Permian, NM and OK).

Position Description | PSV (Pressure Safety Valve) Operator
As a PSV Operator, you will be responsible for maintaining, testing, and troubleshooting PSV systems to ensure safety, compliance, and efficiency across operations.

Key Responsibilities Include:
• Inspect, repair, and maintain Pressure Safety Valves (PSVs) and related equipment to ensure they function properly and meet operational requirements.
• Perform routine inspections, diagnostics, and troubleshooting of PSV equipment to identify any issues or risks; to include disassemble and reassemble valves for repairs or replacements
• Adhere to schematic and documented procedures in compliance with Quality Control Manuals and National Board standards
• Utilize precision measuring instruments to ensure accurate valve performance
• Fabricate and modify valve components as needed
• Collaborate with team members to complete projects and meet deadlines
• Ensure all PSV activities comply with company standards, industry regulations, and safety protocols.
• Document all maintenance and inspection activities, including testing results and any corrective actions taken.
• Schedule and coordinate jobs while supervising the PSV crew.

Requirements:
• National Board Certification is required.
• Strong mechanical knowledge and aptitude
• Experience with industrial maintenance, including valve repair and maintenance
• Familiarity with logic controllers and E&I (Electrical & Instrumentation) systems
• Ability to read and interpret technical drawings and schematics
• Proficient in using precision measuring instruments
• Excellent problem-solving skills to detect and resolve issues with valves
• Basic CNC (Computer Numerical Control) machining skills are a plus
• Strong attention to detail and ability to maintain accurate records
• Customer service-oriented mindset to ensure client satisfaction
• Proven experience in PSV operation, maintenance, and troubleshooting, particularly in industrial or energy sectors.
• Strong understanding of safety standards, regulations, and industry best practices related to PSV systems.
• Ability to work independently, manage time effectively, and prioritize tasks in a dynamic environment.
• Excellent problem-solving and communication skills.

Job Description

Company Profile: Leading supplier of pipe, valve, fittings, flanges, and related products to the energy industry.


Position Details:

Title: Technical Sales Advisor - Actuation
Location: Based out of Carlsbad, NM or Midland, TX office. In office role with no travel.
Shift: Monday – Friday | business hours
Compensation: $85K - $120K (depending on experience) + annual bonus
Benefits: Company offers a comprehensive benefits package including Medical, Dental, Vision, 401(k) with company matching, Life and Disability Insurance, as well as generous PTO and paid holidays.



Position Description

As a member of the Inside Sales Actuation Team, you will be responsible for providing expert guidance on products, and ensuring customer satisfaction throughout the sales process. It works like this: sales come through from the Outside Sales Team who then pass it to Inside Sales. Once Inside Sales has it for action, you will be the one advising the customer by confirming the technical specifications of their project and providing the best solution from your product suite. This may be as simple as providing an off the shelf part or as exciting as helping design a one off custom solution.

Key Responsibilities Include:

Promote and sell a wide range of actuation products and services, including valves, actuators, and related automation solutions.
Follow up on all sales leads, close, and manage all customer contracts.
Provide technical assistance to customers, including explaining product features, benefits, and application options in a clear and understandable manner.
Manage all contract terms, ensure customer satisfaction, and keep contracts current and accurate.
Maintain consistency and accuracy of orders, adhere to timeliness of quotations.
Maintain up-to-date knowledge of product offerings, industry trends, and competitor activities to effectively position our products.
Track all customer contracts, ensures each contract is handled professionally, and meets or exceeds contract end dates.

Training: For the first months you will be travelling to the job sites (primarily regional travel within the Permian Basin) learning how to build the systems prior to transitioning to your full time role as a technical advisor.


Requirements:

The ideal candidate is a Military Veteran with strong knowledge of fluid or steam handling systems. Former Navy Propulsion or Aux Division sailors could be great fits for this. This company serves mostly the oil and gas industry so any experience after the military with oil rigs or pipelines is very beneficial but not required.

Job Description

This semiconductor company provides technologies and radio frequency (RF) solutions for mobile, infrastructure, defense, and aerospace applications in the United States and internationally. The company operates through Mobile Products, and Infrastructure and Defense Products segments. The Mobile Products segment offers complete RF front end modules that combine high-performance filters, power amplifiers (PAs) and switches, PA modules, transmit modules, antenna control solutions, antenna switch modules, diversity receive modules, and envelope tracking power management devices. This segment supplies its RF solutions into various mobile devices, including smartphones, handsets, notebook computers, wearables, and tablets. The Infrastructure and Defense Products segment provides high power gallium arsenide and gallium nitride PAs, amplifiers, switches, fixed frequency and voltage-controlled oscillators, filters, attenuators, modulators, driver and transimpedance amplifiers, and various multichip and hybrid assemblies. This segment offers its RF solutions to wireless network infrastructure, defense, and aerospace markets, and connectivity applications for commercial, consumer, industrial, and automotive markets.


If you are looking for an opportunity where you can use the electronic and/or electrical knowledge you gained in the military and put them to use to make a product that has an impact on people’s everyday lives and is used to make some of the most sophisticated weaponry our military uses then this is the opportunity for you!

Technicians joining the team will work within their large State-of-the-Art Semiconductor facility in Richardson, TX, where you will receive specialized training and have the opportunity to collaborate with talented peers. You will be working in a very clean, high tech, high producing manufacturing environment. You will be responsible for performing functions associated with all manufacturing operations, alongside the engineers in a manufacturing set-up and perform calibration tasks, including: preventative maintenance; failure analysis; quality testing and production of memory chips and logic. You’ll learn and utilize sophisticated programs to collect and evaluate operating data to conduct in-line adjustments to products, instruments, equipment, or processes. Your end product will be used in communications equipment, radar, electronic warfare, space exploration, mobile phones, and countless other applications.



Position Description: Equipment Maintenance Technician:

Responsible for the preventative and corrective maintenance of the tool sets used to manufacture semiconductor products

Responsibilities
• Perform preventive and corrective maintenance on semiconductor manufacturing equipment
• Able to improve system performance to achieve process requirements and eliminate repetitive tool break downs.
• Monitor and analyze all related tool data, make recommendation and improvements to maintenance procedures.
• Work with engineers to design and execute equipment improvement projects.
• Write daily reports and communicate to engineers and technicians on other shifts.

Qualifications
• Strong mechanical, electronic, and troubleshooting skills.
• Excellent oral and written communication skills.
• Demonstrated problem solving ability


Position Details:

Location: Richardson, TX (Suburb of Dallas). Relocation assistance available.

Salary: – $22-$32/hr + Built in Overtime + Shift Differential (12% for N2; 15% for N1)

This opening is for the D2 Shift: 6:00am – 6:00pm Thursday, Friday, Saturday, every other Wednesday

See the chart below to see how the hourly rates are generally broken down, columns 2 and 3 show the Shift Differential added to your hourly rate if you are put on one of the night shifts.

Shift Schedule: Qorvo is a 24 hour operation and this is going to be shift work – working a compressed work week schedule of 3 days on / 4 days off – 4 days on – 3 days off, and you can expect to stay on the same shift schedule for at least 6 months (so this is a non rotating shift). Transition days will be on Wednesday and Saturdays – Payroll starts on Sundays; after the 6 months, you might have the option to change your shift – depending on openings.

This is what the shift pattern looks like:

The Short Week is – 3 on / 36hrs with 4 off
The Long Week is – 4 on/ 48 hrs (includes 8 hrs of overtime) with 3 off

You will average a minimum of 8 hrs overtime per pay period (every 2 weeks). In addition, you can occasionally pick up shifts and work overtime as approved.

You will be assigned one of 4 shifts. You will be assigned either D1 or D2 shift (= day shift) or N1 or N2 shift (= night shift + shift premium***)

D1 Shift: 6:00am –6:00pm Sunday, Monday, Tuesday, every other Wednesday
N1 Shift: 6:00pm – 6:00am Sunday, Monday, Tuesday, every other Saturday with 15% premium per/hr
D2 Shift: 6:00am – 6:00pm Thursday, Friday, Saturday, every other Wednesday
N2 Shift: 6:00pm – 6:00am Wednesday, Thursday, Friday, every other Saturday with 12% premium per/hr

*** Shift Premiums apply to ALL hours worked

If brought on board, you must be flexible, and willing to work any shift – they probably won’t be assigned until after the date of hire.

Benefits: Excellent benefits including Medical insurance, Dental insurance and a matching 401K plan.
will provide relocation for candidates that have already used their military move

Job Description

Orion Talent, the nation’s largest military recruiting firm, is currently recruiting transitioning or former military professionals to be a Millwright / Maintenance Technician with a company that has been at the forefront of the petroleum industry for over 60 years.

Position Details: Millwright / Maintenance Technician
• Location: Ennis
• Shift: Typically, M-F, 8-hour shifts with flexibility for client needs and travel
• Compensation: $29-44/hr. based on experience
• Bonuses/Additional Compensation – Company card for travel expenses and daily travel per diem
• Benefits: Company offers a benefits package including comprehensive health, dental, life, Short- and Long-Term Disability; 401(k) match, profit sharing, and several other benefits.
• Travel: 75% (routine travel to facilities, up to a week, to perform job functions)
• Vaccine Requirement: No

Position Description:
This position provides regional support to facilities for the repair and service of rotating equipment including centrifugal pumps, positive-displacement pumps, colloidal mills, blowers, fans, top and side entering mixers, gearboxes, and other mechanical-related equipment. Service, repair, troubleshoot, and perform preventive maintenance on rotating and mechanical related equipment.

Requirements:
• Knowledge and experience in troubleshooting and repairing rotating equipment
• Basic knowledge of industrial mechanics, welding, and electrical practices
• Demonstrate good communication and organizational skills
• Valid driver’s license

Job Description

Position Details:

Titles: Maintenance Technician

Location: Houston, TX

Shift: The plant runs 12-hour days and 12-hour night schedule Monday – Saturday, off Sunday. You will work days for 3-months then nights for 3-months on rotation. When fully staffed the plant will shift to a 5am-1pm / 1pm-9pm / 9pm-5am shift schedule.

Compensation: 25.94/hr or 32.88/hr depending on your score of the Ramsey Assessment. Your total pay includes your base hourly rate + OT paid out after 8-hours worked daily + shift differential + quarterly + annual target bonuses with multipliers (typically half paid out quarterly, the balance paid annually) Your expected W2 in a year can range from $114k-145k.

Position Description: The Oilwell Services and Offshore Operations of the company are Union facilities and environments, so coming into the company as a maintenance professional will be both challenging and rewarding. Unless you have steel industry manufacturing experience, you must be capable of moving into an environment where you have the least product knowledge and industry experience yet are the responsible maintenance technician who must produce quality results to keep production rolling. You will be working with a group of experienced steel workers along the path to high productivity and excellence, while mastering the overall aspects of the steel business at the front-line maintenance level. Due to the nature of the business, the facilities operate 24 hours/day, 7 days/week, 365 days/year. Therefore, this position?may require work outside of normal hours during plant shutdown and any unplanned/unforeseen outages.

Maintenance Technician – as a Mechanical Maintenance Technician you will be responsible for performing maintenance and repair to facility and production equipment within different areas of the mill. You will be part of the Steel Workers Union workforce that has a tremendous relationship with management throughout the mill. Candidates must have strong troubleshooting and repair skills, and should have experience with the troubleshooting, maintenance, and repair of electrical or mechanical systems within industrial equipment, facilities, automated systems, and other mechanical/engineering systems. Mechanical systems include hydraulics, pneumatics, lubrication, power transmission systems, conveyors, compressors, pumps, cranes, piping, structural, and mobile equipment. Ideal candidates will have good mechanical troubleshooting skills and be creative problem solvers.

Requirements: Candidates must have a high-school diploma or GED. Candidates must have the maintenance experience outlined in the position description above in the military, or in a manufacturing or industrial environment. Candidates must have outstanding safety record and good general understanding of maintenance operations. This is a very industrial, blue-collar environment that requires a keen eye for safety. Candidates must pass a pre-employment hair follicle drug test as the company has a zero-tolerance policy for drugs and alcohol for safe steelmaking operations.